Detailed Product Description

 product is a bicomponent pastelike adhesive based on liquid polysulfide rubber as the mainstay, metal oxide as solidifying additive, matched with special surface treatment chemical(bottom coated).Meanwhile it mixes the high-performance epoxy resin and special coupling additive, modifying their property. Group A evenly is white symmetrical pastelike substances. Group B is dark brown symmetrical pastelike substances. It will become dark grey rubber-elastic after mixed of Part A, B.product propertyBesides the general properties of polysulfide adhesive, the adhesive also has other performances, such as oil-resistance, anti-aging and anti-corrosion of chemicals, excellent airtight, watertight and good bonding performance of various metals, non-metallic materials, especially with outstanding performance of bonding for Poly Ester glass and painted steel plate, enclosed double features of elastic airtight and structure bonding.item: indicatorDensity g/cm: 1.501.65Viscosity pa.s:500800nutunt angel mm≤2Shore hardness≥45Applicable period h≥0.5Tensile property Tensile strength Mpa ≥1.5 Relative elongate rate ≥200 Forever distortion≤25Cut intensityNormal temperature 24hMpa ≥0.3 Normal temperature 168hMpa ≥1.0 808hMpa≥1.0usage:The product is used in bonding, airproofing of automotive polyester glass coping and body, also applicable of the windscreen and window frames.Clean up the surface of the component agglutinated(sealed),which is coated with surface treatment chemical.prepare for weighing group A, B according to the construction site and use strictly in accordance with the regulations formula (A: B = 100:20),mechanical or manual mixing uniform (no chromatism), and gelatinize on the surface of the agglutinated by use of putties knife or a special adhesive tools, then glue the two bonding surface togetherRemove redundant plastic after construction by use of putties knife,fill the defects, tools and skin adhesive compound can be cleaned up by using of cotton yarn dipping acetone.Note: take strict precaution against hollow and bleb in the process of confecting, construction, the gelatinizing surface must be repaired during the construction period, after solidified it would not be damaged to the surface appropriately.Store and Transport:The closed covered storage time is 6 months under the condition of a cool and dry circumstance. if overdued, it can be qualified to use after recheck. railway or road transport with non-inflammable,  non-explosive, non-dangerous goods.  Prohibit raining, inverted and breaking.....